Wednesday, October 8, 2014

Hot Construction Companies To Buy Right Now

Housing starts steadied last month but building permits rebounded to levels last seen in the fall, the Commerce Department said Tuesday.

Builders started construction of new homes at a seasonally adjusted annual rate of 907,000. That's down 0.2% from January's revised estimate of 909,000. The government's previous estimate was 880,000.

February's level was close to economists' median forecast of 910,000 in Action Economics survey. But it's a slowdown from the 1-million-plus annual pace in November and December.

Housing starts increased in the South and Midwest last month, but slowed in the Northeast and West.

Permits, a gauge of future construction, ran at an annual pace of just over 1 million, a 7.7% increase from January and the highest level since October. The gain was all in multifamily housing, where permits have climbed to mid-2008 levels. But permits for single-family houses fell 1.8%, the third straight monthly decline.

Top Safest Companies To Own In Right Now: CEMEX SAB de CV (CX)

CEMEX, S.A.B. de C.V. (CEMEX), incorporated on January 20, 1931, is a global cement manufacturer with operations in North America, Europe, South America, Central America, the Caribbean, Africa, the Middle East and Asia. The Company is a holding company engaged through the operating subsidiaries in the production, distribution, marketing and sale of cement, ready-mix concrete, aggregates and clinker. As of December 31, 2009, the Company�� cement production facilities were located in Mexico, the United States, Spain, the United Kingdom, Germany, Poland, Croatia, Latvia, Colombia, Costa Rica, the Dominican Republic, Panama, Nicaragua, Puerto Rico, Egypt, the Philippines and Thailand.

The Company manufactures cement through a closely controlled chemical process, which begins with the mining and crushing of limestone and clay, and, in some instances, other raw materials. The clay and limestone are then pre-homogenized, a process which consists of combining different types of clay and limestone. The mix is typically dried, then fed into a grinder, which grinds the various materials in preparation for the kiln. The raw materials are calcined, or processed, at a very high temperature in a kiln, to produce clinker. Clinker is the intermediate product used in the manufacture of cement.

Ready-mix concrete is a combination of cement, fine and coarse aggregates, admixtures (which control properties of the concrete including plasticity, pumpability, freeze-thaw resistance, strength and setting time), and water. The Company is a supplier of aggregates primarily the crushed stone, sand and gravel, used in virtually all forms of construction.

Mexican Operations

During the year ended December 31, 2009, the Mexican operations represented approximately 21% of the Company�� net sales. CEMEX Mexico is a direct subsidiary of CEMEX and is both a holding company for some of the operating companies in Mexico and an operating company involved in the manufacturing and ma! rketing of cement, plaster, gypsum, groundstone and other construction materials and cement by-products in Mexico. CEMEX Mexico, indirectly, is also the holding company for the international operations. The Company owns Tolteca, Monterrey, Maya, Anahuac, Campana, Gallo, and Centenario brands in Mexico. As of December 31, 2009, the Company owned 100% of CEMEX Mexico.

The Company competes with Holcim Ltd., Sociedad Cooperativa Cruz Azul, Cementos Moctezuma, Grupo Cementos Chihuahua and Lafarge Cementos in Mexico.

U.S. Operations

As of December 31, 2009, the Company�� operations in the United States represented approximately 19% of the Company�� net sales. As of December 31, 2009, the Company held 100% of CEMEX, Inc. As of December 31, 2009, CEMEX had a cement manufacturing capacity of approximately 17.9 million tons per year in the United States operations. As of December 31, 2009, the Company operated 14 cement plants located in Alabama, California, Colorado, Florida, Georgia, Kentucky, Ohio, Pennsylvania, Tennessee and Texas. As of December 31, 2009, it also had 48 rails or water served active cement distribution terminals in the United States. As of December 31, 2009, the Company had 336 ready-mix concrete plants located in the Carolinas, Florida, Georgia, Texas, New Mexico, Nevada, Arizona, California, Oregon and Washington and aggregates facilities in North Carolina, South Carolina, Arizona, California, Florida, Georgia, Kentucky, New Mexico, Nevada, Oregon, Texas, and Washington.

Spanish Operations

As of December 31, 2009, the operations in Spain represented approximately 5% of the Company�� net sales. As of December 31, 2009, the Company held approximately 99.8% of CEMEX Espana, the main operating subsidiary in Spain. The cement activities in Spain are conducted by CEMEX Espana. The ready-mix concrete activities in Spain are conducted by Hormicemex, S.A., a subsidiary of CEMEX Espana, and the aggregates activities in Spain ar! e conduct! ed by Aricemex S.A., also a subsidiary of CEMEX Espana.

U.K. Operations

As of December 31, 2009, the Company�� operations in the United Kingdom represented approximately 8% of the Company�� net sales. As of December 31, 2009, it held 100% of CEMEX Investments Limited, the holding subsidiary in the United Kingdom. The Company is a provider of building materials in the United Kingdom with vertically integrated cement, ready-mix concrete, aggregates and asphalt operations. It is also a provider of concrete and precast materials solutions, such as concrete blocks, concrete block paving, roof tiles, flooring systems and sleepers for rail infrastructure.

The Company competes with Lafarge, Heidelberg, Tarmac, and Aggregate Industries in the United Kingdom.

German Operations

As of December 31, 2009, the operations in the Rest of Europe consisted of the operations in Germany, France, Ireland, Poland, Croatia, the Czech Republic, Latvia, Austria and Hungary, as well as the other European assets. The Company is a provider of building materials in Germany, with vertically integrated cement, ready-mix concrete, aggregates and concrete products operations (consisting mainly of prefabricated concrete ceilings and walls). It maintains a network for ready-mix concrete and aggregates in Germany. As of December 31, 2009, the Company held 100% of CEMEX Deutschland AG, the holding subsidiary in Germany.

The Company competes with Heidelberg, Dyckerhoff, Lafarge, Holcim and Schwenk in Germany.

French Operations

As of December 31, 2009, the Company held 100% of CEMEX France Gestion (S.A.S.), the holding subsidiary in France. It is a ready-mix concrete producer and aggregate producer in France. As of December 31, 2009, the Company operated 239 ready-mix concrete plants in France, one maritime cement terminal located in LeHavre, on the northern coast of France, 20 land distribution centers and 42 aggregates quarries.

The Company competes with Lafarge, Holcim, Italcementi, Vicat, Lafarge, Italcementi, Colas (Bouygues) and Eurovia (Vinci) in France.

Irish Operations

As of December 31, 2009, the Company held approximately 61.2% of Readymix Plc, the operating subsidiary in the Republic of Ireland. The operations in Ireland produce and supply sand, stone and gravel, as well as ready-mix concrete, mortar and concrete blocks. As of December 31, 2009, we operated 43 ready-mix concrete plants, 27 aggregates quarries and 15 block plants located in the Republic of Ireland, Northern Ireland and the Isle of Man. The Company imports and distributes cement in the Isle of Man.

The Company competes with CRH, the Lagan Group and Kilsaran in the Republic of Ireland.

Polish Operations

As of December 31, 2009, the Company held 100% of CEMEX Polska Sp. z.o.o. (CEMEX Polska), the holding subsidiary in Poland. It is a provider of building materials in Poland serving the cement, ready-mix concrete and aggregates markets. As of December 31, 2009, CEMEX operated two cement plants and one grinding mill in Poland, with a total installed cement capacity of three million tons per year. As of December 31, 2009, the Company also operated 39 ready-mix concrete plants and nine aggregates quarries in Poland. As of December 31, 2009, the Company also operated 10 land distribution centers and two maritime terminals in Poland.

The Company competes with Heidelberg, Lafarge, CRH and Dyckerhoff in Poland.

Southeast European Operations

As of December 31, 2009, the Company held 100% of CEMEX Hrvatska d.d. (Hrvatska), the operating subsidiary in Croatia. As of December 31, 2009, it operated three cement plants in Croatia, with an installed capacity of 2.4 million tons per year. As of December 31, 2009, the Company also operated ten land distribution centers, three maritime cement terminals, eight ready-mix concrete facilities and one aggregates quarry! in Croat! ia, Bosnia and Herzegovina, Slovenia, Serbia and Montenegro.

Advisors' Opinion:
  • [By GuruFocus]

    George Soros (Trades, Portfolio) just reported his first quarter portfolio. He buys Citrix Systems Inc, Baker Hughes Inc, Comcast Corp, Spansion Inc, etc during the 3-months ended 03/31/2014, according to the most recent filings of his investment company, Soros Fund Management LLC. As of 03/31/2014, Soros Fund Management LLC owns 305 stocks with a total value of $10.1 billion. These are the details of the buys and sells.New Purchases: BHI, CODE, CTRP, CLI, AVB, COMM, CNQ, AGO, AUY, ATML, ASH, BXMT, CSTM, AEM, CMA, ARE, CHKP, AUQ, BEAV, CX, ADSK, AALCP, BLK, AIG, BIIB, ADEP, AMRI, ARWR, ATHX, BALT, BCRX, BEAT, CFX, CLFD, CUR, CODE,Added Positions: CTXS, CMCSA, CNP, ALTR, BRCD, CBS, CRM, CHTR, CCJ, CIEN, BIDU, ALLE, ABT, CDNS, ACT,Reduced Positions: AAPL, CCI, AMT, ABBV, AAL, BITA, AL, ANGI, ARIA, CBST, BA, BIRT, EXAR,Sold Out: C, BAC, CRI, AMZN, AGN, CF, BRCM, COTY, BMY, AMCX, CAR, A, ADBE, AFL,For the details of George Soros (Trades, Portfolio)'s stock buys and sells, go to http://www.gurufocus.com/StockBuy.php?GuruName=George+SorosThis is the sector weightings of his portfolio:Technology18.9%Energy14%Healthcare8.3%Consumer Defensive8.2%Communication Services8.1%Consumer Cyclical5.4%Industrials5.1%Basic Materials4.9%Financial Services2.5%Real Estate1.9%Utilities0.5%These are the top 5 holdings of George Soros (Trades, Portfolio)1. Teva Pharmaceutical Industries Ltd (TEVA) - 10,310,041 shares, 5.4% of the total portfolio. Shares added by 10.67%2. Herbalife Ltd (HLF) - 4,901,337 shares, 2.8% of the total portfolio. Shares added by 52.9%3. EQT Corp (EQT) - 2,573,814 shares, 2.5% of the total portfolio. Shares added by 3.27%4. Adecoagro SA (AGRO) - 25,915,076 shares, 2.1% of the total portfolio.5. Halliburton Co (HAL) - 3,596,353 shares, 2.1% of the total portfolio. Shares reduced by 20.73%New Purchase: Baker Hughes Inc (BHI)George Soros (Trades, Portfolio) initiated holdings in Baker Hughes Inc. His purchase prices were between $51.82 and $65.27, with an estimated

  • [By Monica Wolfe]

    Cemex SAB de CV (CX)

    As of the close of the third quarter there were nine guru owners of Cemex. These gurus held a combined weighting of 5.30%. During the third quarter, there were three gurus making buys and nine making sells of their stake in CX.

  • [By Dan Caplinger]

    Even now, though, it's far from clear whether the recent rebound has staying power. Earlier this month, peer Vulcan Materials (NYSE: VMC  ) reported 5% lower shipments of aggregates, although rising prices helped offset the impact, and the company noted double-digit-percentage increases in shipments to hot housing areas including Arizona, California, and Florida. Similarly, Cemex (NYSE: CX  ) posted a substantial loss for its March quarter on with 5% lower revenue, but the Mexican company pointed to strength in the U.S. and Asian markets as offsetting weakness in Mexico, Europe, and Latin America.

  • [By Ben Levisohn]

    Shares of Vulcan have gained 7.6%, and given a lift to other cement makers today, including Martin Marietta Materials (MLM), which has risen 4.9% and reports earnings on Thursday, Cemex (CX), which has advanced 1.5%, and Texas Industries (TXI), which is up 4.9%.

Hot Construction Companies To Buy Right Now: Holcim Ltd (HOLN)

Holcim Ltd (Holcim) is a Switzerland-based holding company that specializes in the manufacture, distribution and marketing of building materials. The Company operates four business segments, including Cement, Aggregates, Other construction materials and services, and Corporate. The Cement segment is engaged in the development of cement and comprises clinker and other cementitious materials, among others. The Aggregates business segment includes crushed stone, gravel and sand. The Other construction materials and services business segment comprises ready-mix concrete, concrete products, asphalt, construction and paving, and trading, among others. Additionally, other construction materials and services segment provides environmental services, including waste management, among others. The Corporate segment is engaged in holding activities and general management. It operates through subsidiaries in Asia Pacific, Latin America, Europe, North America, Africa and Middle East regions. Advisors' Opinion:
  • [By Sofia Horta e Costa]

    Holcim Ltd. (HOLN) lost 0.9 percent to 68.15 francs in Zurich. Bank of America Corp.�� Merrill Lynch unit cut its rating on the world�� largest cement maker to underperform, similar to a sell recommendation, from neutral. Merrill Lynch cited the company�� exposure to emerging markets.

Hot Construction Companies To Buy Right Now: Boral Ltd (BLD)

Boral Limited (Boral), is engaged in the manufacture and supply of building and construction materials in Australia, the United States and Asia. The Company�� operating segments include Construction Materials & Cement, Building Products, Boral Gypsum, and Boral USA. The Construction Materials & Cement is engaged in quarries, concrete, asphalt, transport, landfill, property, cement and concrete placing. The Building Products segment is engaged in Australian bricks, roof tiles, masonry, timber products and windows. The Boral Gypsum involves Australian and Asian plasterboard. The Boral USA is engaged in Bricks, cultured stone, roof tiles, fly ash, concrete and quarries. Advisors' Opinion:
  • [By Eric Lam]

    Ballard Power (BLD), which designs and manufactures hydrogen fuel cells, slumped 15 percent to C$1.42, the biggest decline since March. The company yesterday said it will sell about 9 million units at $1.40 a unit for proceeds of about $12.6 million. The cash generated will be used to fund working capital, support growth and general corporate purposes, the company said.

Hot Construction Companies To Buy Right Now: Aegion Corp (AEGN)

Aegion Corporation, incorporated on August 17, 2011, is engaged in infrastructure protection, providing technologies and services to protect against the corrosion of industrial pipelines and for the rehabilitation and strengthening of sewer, water, energy and mining piping systems and buildings, bridges, tunnels and waterfront structures. The Company operates in five segments: Energy and Mining, North American Sewer and Water Rehabilitation, European Sewer and Water Rehabilitation, Asia-Pacific Sewer and Water Rehabilitation and Commercial and Structural. The Company�� business activities include manufacturing, distribution, installation, coating and insulation, cathodic protection, research and development and licensing. Its products and services are utilized and performed in more than 100 countries across six continents. The Company offers solutions for rehabilitating aging or deteriorating infrastructure and protecting new infrastructure from corrosion. In June 2013, Aegion Corporation announced that it has sold its 50% interest in Insituform Rohrsanierungstechniken GmbH (Insituform-Germany) to Per Aarsleff A/S. In July 2013, Aegion Corp announced that it has completed the acquisition of Brinderson, L.P.

In March 2012, the Company organized United Special Technical Services LLC (USTS), a joint venture located in the Sultanate of Oman between United Pipeline Systems and Special Technical Services LLC (STS), for the purpose of executing pipeline, piping and flow line high-density polyethylene lining services throughout the Middle East and Northern Africa. United Pipeline Systems holds a 51% equity interest in USTS and STS holds the remaining 49% equity interest. In November 2012, the Company acquired the shares of its joint venture partner, SPML Infra Limited (SPML), an unaffiliated Indian contractor, in Insituform Pipeline Rehabilitation Private Limited (Insituform-India) in order to continue to pursue business opportunities in India involving CIPP installations and third party tube! sales, as well as to promote its other products and services. In January 2012, the Company purchased Fyfe Group�� Latin American operations (Fyfe LA), which included all of the equity interests of Fyfe Latin America S.A., a Panamanian entity (and its interest in various joint ventures located in Peru, Costa Rica, Chile and Colombia), Fyfe Latin America S.A. de C.V., an El Salvadorian entity, and Fibrwrap Construction Latin America S.A., a Panamanian entity. In April 2012, the Company purchased Fyfe Group�� Asian operations (Fyfe Asia), which included all of the equity interests of Fyfe Asia Pte. Ltd, a Singaporean entity (and its interest in two joint ventures located in Borneo and Indonesia), Fyfe (Hong Kong) Limited, Fibrwrap Construction (M) Sdn Bhd, a Malaysian entity, Fyfe Japan Co. Ltd and Fibrwrap Construction Pte. Ltd and Technologies & Art Pte. Ltd., Singaporean entities.

Energy and Mining

The Company�� energy and mining operations provide rehabilitation and corrosion protection services for industrial, mineral, oil and gas piping systems and structures. The Company also offers products for gas release and leak detection systems. Its worldwide energy and mining operations are headquartered in Chesterfield, Missouri. These operations are conducted through its various subsidiaries (United Pipeline Systems based in Durango, Colorado, Bayou based in New Iberia, Louisiana, Corrpro based in Houston, Texas, CRTS based in Tulsa, Oklahoma and Hockway based in the United Arab Emirates). Certain of its energy and mining operations outside of the United States are conducted through its wholly owned subsidiaries in the United Kingdom, Portugal, Chile, Canada, Argentina, Brazil and the United Arab Emirates and through its joint ventures in Canada, Mexico, Oman, Singapore, Saudi Arabia and Morocco.

United Pipeline Systems performs pipeline rehabilitation services using its Tite Liner process. Its Bayou business performs internal and external pipeline coating, lini! ng, weigh! ting and insulation services, as well as specialty fabrication services for offshore deep water installations, including project management and logistics. Its Corrpro business performs fully-integrated corrosion prevention services including: engineering; product and material sales; construction and installation; inspection, monitoring and maintenance; andcoatings. Its CRTS business specializes in the application of internal and external corrosion coatings services and equipment for new pipeline construction projects. Its Hockway business performs cathodic protection, engineering and design, manufacturing, maintenance and installation services to the oil and gas markets.

Water and Wastewater Rehabilitation Operations

The Company�� sewer rehabilitation activities are conducted principally through installation and other construction operations performed directly by its subsidiaries. In certain geographic regions, the Company has granted licenses to unaffiliated companies. Its North American Water and Wastewater operations, including research and development, engineering, training and financial support systems, are headquartered in Chesterfield, Missouri. During the year ended December 31. 2012, tube manufacturing and processing facilities for North America were maintained in eight locations, geographically dispersed throughout the United States and Canada.

The Company also conducts Insituform CIPP process rehabilitation operations worldwide through its wholly owned subsidiaries and through direct and indirect joint venture relationships. The results from these operations are included in its European Water and Wastewater and Asia-Pacific Water and Wastewater operating segments, as appropriate. The Company utilize multifunctional robotic devices developed by its French subsidiary in connection with the inspection and repair of pipelines. The Company also maintain a manufacturing facility in Wellingborough, United Kingdom to support European operations and through wh! ich the C! ompany sell liners to third parties.

Commercial and Structural Operations

The Company�� commercial and structural operations perform rehabilitation and strengthening of pipelines, buildings, bridges, tunnels and waterfront structures throughout the United States and Canada through Fibrwrap Construction Services, headquartered in Ontario, California, in its Asian markets through Its wholly owned subsidiaries and through Its joint ventures in Borneo and Indonesia and in its Latin American markets through its joint ventures in Chile, Colombia, Costa Rica and Peru. Through Fyfe Co., headquartered in San Diego, California, the Company designs and manufactures the FRP composite systems used in these applications. It�� wholly owned Fyfe entities located in El Salvador, Singapore, Japan, Malaysia and Hong Kong and its Fyfe joint ventures in Borneo and Indonesia, provide product and engineering services throughout Latin America and Asia-Pacific. Its licensee in Greece provides product and services throughout the Middle East and Europe.

Advisors' Opinion:
  • [By Rich Duprey]

    Infrastructure protection specialist Aegion (NASDAQ: AEGN  ) announced yesterday that it was acquiring maintenance, contraction, and engineering firm�Brinderson for $150 million and that the deal will close on July 1.

  • [By CRWE]

    Aegion Corporation (Nasdaq:AEGN) reported the award today of two subcontracts for its Malaysian subsidiary, Insituform Linings Asia Sdn Bhd, with a total value of approximately $9.3 million (USD).

  • [By Alexis Xydias]

    The ISEQ Index (ISEQ) in Ireland and the ASE Index in Greece, the first two nations to receive European Union-led bailouts, have soared more than 28 percent this year to lead gains among 18 national benchmarks in western Europe. Dublin-based Independent News & Media Plc (INM) and Athens-based Aegean Airlines SA (AEGN) rose the most, with jumps of more than 180 percent. Germany�� DAX Index (DAX) has advanced 18 percent in 2013, reaching a record.

  • [By Damian Illia]

    Finally, I always like to see one of the most important financial ratios applying to stockholders, the best measure of performance for a firm's management: the return on equity. The ratio has decreased when compared to its ROE from the same quarter one year prior. This is a signal of major weakness. Moreover, it is worse than those shown in the table like Aegion Corporation (AEGN), EnerNOC Inc. (ENOC), MYR GroupInc. (MYRG) and Pike Corporation (PIKE).

Hot Construction Companies To Buy Right Now: Amcol International Corp (ACO)

AMCOL International Corporation (AMCOL), incorporated on December 3, 1959, is focused on the development and application of minerals and technology products and services to various industrial and consumer markets. It operates in five segments: performance materials, construction technologies, energy services, transportation and corporate. Its performance materials segment previously referred to as its minerals and materials segment is a supplier of bentonite related products. Its construction technologies segment previously referred to as its environmental segment provides products for non-residential construction, environmental and infrastructure projects worldwide. Its energy services segment previously referred to as its oilfield services segment offers a range of patented technologies, products and services for both upstream and downstream oil and gas production. Its transportation segment serves domestic subsidiaries, as well as third parties, is a dry van and flatbed carrier and freight brokerage service provider.

Performance Materials Segment

The Company supplies chromite and leonardite, and operates more than 25 mining or production facilities worldwide. It mines chromite, an iron chromium oxide, from open cast mines in South Africa and transport it to our nearby processing facility. Its primary uses include metalcasting, drilling fluid additive, and agricultural applications. Its performance materials segment conducts its business through wholly owned subsidiaries and investments in affiliates and joint ventures throughout the world. It consists of four product lines: metalcasting; specialty materials; basic minerals, and pet products. Its principal products are marketed under various registered trade names, including VOLCLAY, PANTHER CREEK, PREMIUM GEL, ADDITROL, ENERSOL, and Hevi-Sand.

The Company�� metalcasting products include blended mineral binders containing sodium and calcium bentonite and organic additives sold under the trade name ADDITROL. I! n the ferrous casting market, the Company specializes in blending bentonite of various grades by themselves or with mineral binders containing sodium bentonite, calcium bentonite, seacoal and other ingredients. It also has a line of formulated additives that introduce silicon and carbon in the melt phase of the casting process. In the steel alloy casting market, it sells a chromite product with a particle size distribution specific to a customer�� needs.

The Company�� specialty materials products contain bentonite and synthetic additives offering solutions for consumer and industrial applications. It also offers products for bio-agricultural applications. The markets and applications of its specialty materials products include fabric care, personal care, basic materials and pet products. It supply high-grade, agglomerated bentonite and other mineral additives used in fabric care products. It manufactures adsorbent polymers and purified grades of bentonite for sale to manufacturers of personal skin care products. The adsorbent polymers are used to deliver high-value actives in skin-care products. Microsponge and Poly-Pore are the principal trade names under which these products are sold. Its basic minerals product line supplies minerals to a variety of markets and industrial applications, including drilling fluid additives, ferro alloys and other industrial.

The Company�� pet products include sodium bentonite-based scoopable (clumping), traditional and alternative cat litters, as well as specialty pet products sold to grocery and drug stores, mass merchandisers, wholesale clubs and pet specialty stores throughout the United States. It is primarily a private-label producer of cat litter, and its products are marketed under various trade names. These products are sold solely in the United States from three principal sites from which it package and distribute finished goods. Its transportation segment provides logistics services and is a component of its capability in supplyi! ng custom! ers on a national basis.

Construction Technologies Segment

The Company�� construction technologies segment serves customers engaged in a range of construction projects, including site remediation, concrete waterproofing for underground structures, liquid containment on projects ranging from landfills to flood control, and drilling applications including foundation, slurry wall, tunneling, water well and horizontal drilling. Its construction technologies segment conducts its business through wholly owned subsidiaries and joint ventures throughout the world. This segment consists of four product lines: building materials; contracting services; drilling products, and lining technologies.

The Company sells lining and other products for a variety of applications, most of which are directed to preserving or remediating environmental issues. It helps customers protect ground water and soil through the sale of geosynthetic clay liner products containing bentonite. It market these products under the BENTOMAT and CLAYMAX trade names principally for lining and capping landfills, mine waste disposal sites, water and wastewater lagoons, secondary containments in tank farms, and other contaminated sites. It also provides associated geosynthetic materials for these applications, including geotextiles and drainage geocomposites.

The Company�� lining technologies product line also includes specialized technologies to mitigate vapor intrusion in new building construction. It also provides reactive capping technologies and solutions to contain residual contamination, reduce costs associated with ex-situ remedies, and aid in environmental protection. Products offered include Liquid Boot, a liquid applied vapor barrier system; REACTIVE CORE-MAT, an in-situ sediment capping material; ORGANOCLAY, which absorbs organic containments, and QUIK-SOLID, a super absorbent media.

The Company offer a variety of active and passive waterproofing and greenroof technolog! ies for u! se in protecting the building envelope of non-residential constructions, including buildings, subways, and parkway systems. Its products include VOLTEX, a waterproofing composite comprised of two polypropylene geotextiles filled with sodium bentonite; ULTRASEAL, an advanced membrane using a active polymer core, and COREFLEX, featuring heat-welded seams for protection of critical infrastructure. In addition to these membrane materials, it also provides roofing products and a variety of sealants and other accessories required to create a functional waterproofing system.

The Company drilling products are used in environmental and geotechnical drilling applications, horizontal directional drilling, mineral exploration and foundation construction. The products are used to install monitoring wells, facilitate horizontal and water well drilling, and seal abandoned exploration drill holes. VOLCLAY GROUT, HYDRAUL-EZ, BENTOGROUT and VOLCLAY TABLETS are among the trade names for products used in these applications. It also offer a range of drilling products used in the excavation of foundations for large buildings, bridges and dams; these products include SHORE PAC and PREMIUM GEL. Contracting services, which involve installation of products, are occasionally offered to customers for select projects.

Energy Services Segment

The Company�� energy services segment provides services to improve the production, costs, compliance, and environmental impact of activities performed in the oil and gas industry. Operating as CETCO Energy Services, it offer a range of patented technologies, products and services for all phases of oil and gas production, transportation, refining, and storage throughout the world. It provide both land-based and offshore water treatment, well testing, pipeline separation, nitrogen, coil tubing and other services to the oil and gas industry. The Company provides its services through subsidiaries located in Australia, Brazil, Malaysia, Nigeria, the United Ki! ngdom, an! d the United States, principally in the Gulf of Mexico and the surrounding on-shore area. Its principal services include water treatment, coil tubing, well testing, nitrogen services and pipeline. The Company helps customers comply with regulatory requirements by providing equipment, technologies, personnel and filtration media to treat waste water generated during oil production.

The Company's coil tubing services utilize metal piping, which comes spooled on a large reel. It provide both equipment and operating personnel to perform services ranging from acid stimulation, reverse circulation, cementing, pressure control, nitrogen injection, and other operations that involve pumping fluids into a well. Horizontal wells and shale completions are a large component of its operations. It provide equipment and personnel to help customers control well production, as well as to clean up, unload, separate, measure component flow, and dispose of fluids from oil and gas wells. Nitrogen services are provided in jetting wells that are loaded with fluid; stimulating wells, including fracturizing and acidizing; displacing completion fluids prior to perforating; inflating flotation devices for offshore installations, and pressure testing and other maintenance activities.

Transportation Segment

The Company operates a long-haul trucking business through Ameri-Co Carriers, Inc., and a freight brokerage business through Ameri-Co Logistics, Inc. primarily for delivery of finished products throughout the continental United States. These services are provided to its subsidiaries, as well as third-party customers.

Advisors' Opinion:
  • [By Seth Jayson]

    AMCOL International (NYSE: ACO  ) is expected to report Q2 earnings on July 26. Here's what Wall Street wants to see:

    The 10-second takeaway
    Comparing the upcoming quarter to the prior-year quarter, average analyst estimates predict AMCOL International's revenues will grow 1.6% and EPS will wither -16.9%.

  • [By Jake L'Ecuyer]

    Leading and Lagging Sectors
    In trading on Friday, Basic Materials shares were relative leaders, up on the day by 0.78 percent. Top gainer in the sector was AMCOL International (NYSE: ACO), up 9 percent.

Hot Construction Companies To Buy Right Now: Societe Libanaise des Ciments Blancs SAL (CBN)

Societe Libanaise des Ciments Blancs SAL is a Lebanon-based joint stock company that operates in the construction materials industry sector. The Company is engaged in the production and sale of white cement. The Company is a 65.99% owned by Holcim (Liban) SAL. Advisors' Opinion:
  • [By CanadianValue]

    Nigeria�� reformed banking system has provided many foreigners with an attractive means to invest in the fast-growing domestic economy. The banking industry is important, not only because of the rise of microfinance, but because of the move by banks into consumer banking. Until recently, banks were mainly financing large businesses or the government through bond purchases. Following a banking crisis in 2008, the Central Bank of Nigeria (CBN) conducted an audit of the commercial banking sector. All banks that failed the audit had their CEOs replaced. The state-owned Asset Management Corporation (AMCON) was created to purchase non-performing loans and recapitalize the unhealthy banks. A recent review of the country�� banks by the IMF showed a dramatic increase in profits for the industry in 2012, while the capital adequacy ratio was above the minimum requirement of 10% and non-performing loans were below the mandated threshold of 5%5.

No comments:

Post a Comment